Flare-Seal® Convoluted Hose
Heavy Wall Open Pitch Vacuum with 316 Stainless Steel Braid
 
PARKER PAGE Flare-Seal® PTFE hose products are designed and manufactured to provide the ultimate in high purity, and corrosion/chemical resistance for sanitary applications. The unique benefit offered by a PARKER PAGE Flare-Seal hose is that the PTFE hose liner actually passes through the inside of the fitting and is then flared over the face of the fitting. This special process eliminates the problem of bacterial entrapment and adds the benefit of unrestricted flow by providing 100% PTFE coverage on all wetted surfaces.

Flare-Seal products can be provided with flanged ends or sanitary tri-clamp end connections.

These PTFE Hose Product Materials are Compliant with the Following Requirements:
  • FDA 21 CFR 177.1550
  • USP XXIII Class VI Requirements
  • ISO 10993 Sections 5, 6, 10, 11
  • USDA Standards
Key Benefits:
  • Flare Seal fitting - Continuous PTFE through fitting; no area for bacterial entrapment
  • Unrestricted flow
  • Thicker wall
  • Excellent chemical compatibility
  • Non-Adhesive, Easy to Clean
 
 
 

Part
Number
Nominal
I.D.
Nominal
O.D.
Maximum
Working
Pressure
72F/23C
Minimum Bend
Radius
Vacuum Rating
Hg./72F
Weight
Natural Conductive inch mm inch mm psi bar inch mm inch lbs./ft. kg./mtr.
08-SCWV-FS 08-SCBV-FS 1/2 13 .72 18 500 35 2 51 30 .17 .26
12-SCWV-FS 12-SCBV-FS 3/4 19 1.04 26 425 29 2-3/4 70 30 .33 .49
16-SCWV-FS 16-SCBV-FS 1 25 1.25 32 350 24 4 102 30 .37 .55
20-SCWV-FS 20-SCBV-FS 1-1/4 32 1.66 42 325 22 5-1/2 140 30 .56 .83
24-SCWV-FS 24-SCBV-FS 1-1/2 38 1.92 49 300 21 7 178 30 .64 .95
32-SCWV-FS 32-SCBV-FS 2 51 2.49 63 250 17 8-1/2 216 30 .84 1.24
40-SCWV-FS 40-SCBV-FS 2-1/2 64 3.25 83 200 14 12 305 30 1.52 2.26
48-SCWV-FS 48-SCBV-FS 3 76 3.80 97 175 12 14 356 30 1.82 2.71
64-SCWV-FS 64-SCBV-FS 4 102 4.76 121 150 10 16 406 30 2.10 3.13
 

Construction:

Tube: SCWV-FS - Heavy Wall Natural FDA Compliant PTFE
           SCBV-FS - Heavy Wall Black Static Dissipative PTFE
Reinforcement: 316 Stainless Steel braid

Fittings:

PAGE Fittings
Factory-made assemblies only

Operating Parameters:

Temperature Range: -100 to 500F/-75 to 260C
Min. Burst Pressure is 4x Max. Working Pressure at 73F (23C)

Notes:

Cannot be used with 90 or 91/91N series fittings

  
  
   About Us    Quotations    Literature    Directions    Site Map    Products Page International Hose  
©2017 Parker Hannifin Corporation - All Rights Reserved