Silicone Hose
SWPV Platinum Cured 4 Ply Silicone Hose with Stainless Steel Wire Helix
 
As a compliment to our successful Fluoropolymer and Sanitary Food Grade Hoses, PAGE has extended its hose line to include Platinum Cured Silicone products. These high quality hoses continue the PAGE tradition of total customer satisfaction.
These PTFE Hose Product Materials are Compliant with the Following Requirements:
  • FDA 21 CFR 177.1550, 177.2600
  • USP XXIII Class VI Certified
  • European Pharmacopoeia 3.1.9
  • ISO 10993 Sections 5, 6, 10, 11
  • USDA Standards
  • 3A Standards
Key Benefits:
  • Insulates hose for safer operator handling
  • Good chemical compatibility
  • Non-Adhesive, Easy to Clean
 
 
 

 
Part
Number
Nominal
I.D.
Maximum O.D. Maximum
Working
Pressure
72°F/23°C
Minimum
Burst
Pressure
72°F/23°C
Vacuum Rating
Hg./72°F
Minimum Bend
Radius
Weight Permanent
Fitting
Series
Natural inch mm inch mm psi Mpa psi Mpa inch inch mm lbs./ft. kg./mtr.  
08-SWPV .500 13 .900 23 250 17 750 52 30 1-1/2 38 .27 .40 98
12-SWPV .750 19 1.150 29 250 17 750 52 30 2-1/2 64 .37 .55 98
16-SWPV 1.000 25 1.400 36 250 17 750 52 30 3 76 .46 .69 98
24-SWPV 1.500 38 1.900 48 250 17 750 52 30 4 102 .66 .98 98
32-SWPV 2.000 51 2.400 61 230 16 700 48 30 5-1/2 140 .85 1.27 98
 

Construction:

Tube: Platinum Cured Silicone
Reinforcement: Wrapped textile with Stainless Steel wire helix
Cover: Platinum cured silicone

Fittings:

98 Series
Uses crimp collar SIL300
Cannot be used with 90 or 91/91N series fittings

Operating Parameters:

Temperature Range: -80°F to +450°F/-62°C to +232°C
Min. Burst Pressure is 4x Max. Working Pressure at 73°F (23°C)
All ratings based on 73°F (23°C)

Working Pressures may vary depending upon end connections and process and temperature parameters

Notes:

Cannot be used with 90 or 91/91N series fittings

  
  
   About Us    Quotations    Literature    Directions    Site Map    Products Page International Hose  
© Parker Hannifin Corp. 2011